Pneumatic Fitting Straight PC 10 -02
Tips for choosing a quick coupler 01: How to choose a quick coupler: 1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used. 2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break. 3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe. 4. General industrial water can be used. 5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage. 02: How to install the quick connector? 1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars. 2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin. 3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid...
