Pneumatic Fittings - Page 9 - Hongmi Pneumatic Co., Ltd

PMF Bulkhead Female Straight Push-to-Connect Pneumatic Fitting

2026-05-04

Specifications Parameter Details Product Type Pneumatic Fittings Structure Bulkhead Female Straight Connection Tube to Thread Installation Panel Mount (Bulkhead) Thread Type M5 / R1/8 / R1/4 / R3/8 / R1/2 Material Nickel-Plated Brass Seal Type O-Ring Seal Operating Fluid Air / Vacuum / Water (No Freezing) Proof Pressure 1.32 MPa Working Pressure 0 – 0.9 MPa Temperature Range 0 – 60°C Lock Claw Stainless Steel (SUS) Applicable Tubing PU / Nylon Tube Nickel-plated brass bulkhead fittings provide strong sealing, corrosion resistance, and stable performance in pneumatic systems. Model ΦD R A B H1 H2 M PMF4-M5 4 M5 5.5 24 14 14 M12×1 PMF4-01 4 R1/8 8 24 14 14 M12×1 PMF4-02 4 R1/4 9.5 27.5 15 14 M12×1 PMF6-M5 6 M5 5.5 25.5 15 17 M14×1 PMF6-01 6 R1/8 8 25.5 15 17 M14×1 PMF6-02 6 R1/4 9.5 29.5 15 17 M14×1 PMF6-03 6 R3/8 10.5 30 19 17 M14×1 PMF6-04 6 R1/2 11.5 31 24 17 M14×1 PMF8-01 8 R1/8 8 26 17 19 M16×1 PMF8-02 8 R1/4 9.5 26 17 19 M16×1 PMF8-03 8 R3/8 10.5 30.5...

Plastic Steel C-Type Pneumatic Quick Joint Self-Locking

2026-05-04

Tips for choosing a quick coupler 01: How to choose a quick coupler: 1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used. 2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break. 3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe 4. General industrial water can be used. 5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage. 02: How to install the quick connector? 1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars. 2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin. 3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid...

C-type Quick Coupling for Air Compressor

2026-05-01

Tips for choosing a quick coupler 01: How to choose a quick coupler: 1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used. 2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break. 3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe 4. General industrial water can be used. 5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage. 02: How to install the quick connector? 1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars. 2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin. 3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to...

C-type self-locking plastic steel pneumatic joint

2026-05-01

Tips for choosing a quick coupler 01: How to choose a quick coupler: 1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used. 2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break. 3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe 4. General industrial water can be used. 5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage. 02: How to install the quick connector? 1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars. 2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin. 3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid...

PMF Bulkhead Female Straight Push-to-Connect Pneumatic Fitting

Plastic Steel C-Type Pneumatic Quick Joint Self-Locking

C-type Quick Coupling for Air Compressor

C-type self-locking plastic steel pneumatic joint

ABOUT US SALES NETWORK CONTACT US CAREERS

Quick Links

Contact